 |
Texas Administrative Code (Last Updated: March 27,2024) |
 |
TITLE 30. ENVIRONMENTAL QUALITY |
|
PART 1. TEXAS COMMISSION ON ENVIRONMENTAL QUALITY |
|
CHAPTER 113. STANDARDS OF PERFORMANCE FOR HAZARDOUS AIR POLLUTANTS AND FOR DESIGNATED FACILITIES AND POLLUTANTS |
|
SUBCHAPTER D. DESIGNATED FACILITIES AND POLLUTANTS |
|
DIVISION 4. EMISSIONS GUIDELINES AND COMPLIANCE TIMES FOR COMMERCIAL AND INDUSTRIAL SOLID WASTE INCINERATION UNITS THAT COMMENCED CONSTRUCTION ON OR BEFORE NOVEMBER 30, 1999 |
SECTION 113.2238. What information must I submit following my initial performance test?
Latest version.
-
You must submit the information specified in paragraphs (1) through (3) of this section no later than 60 days following the initial performance test. All reports must be signed by the facilities manager.
(1) The complete test report for the initial performance test results obtained under §113.2226 of this title (relating to How do I demonstrate initial compliance with the emission limitations and establish the operating limits?), as applicable. (2) The values for the site-specific operating limits established in §113.2221 or §113.2222 of this title (relating to What operating limits must I meet and by when? or What if I do not use a web scrubber to comply with the emission limitations?). (3) If you are using a fabric filter to comply with the emission limitations, documentation that a bag leak detection system has been installed and is being operated, calibrated, and maintained as required by §113.2232(b) of this title (relating to What monitoring equipment must I install and what parameters must I monitor?). Source Note: The provisions of this §113.2238 adopted to be effective May 14, 2009, 34 TexReg 2771