SUBCHAPTER A. DEFINITIONS

§ 113.1. Definitions

SUBCHAPTER B. NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS (FCAA, §112, 40 CFR PART 61)

DIVISION 1. RADIONUCLIDE NESHAPS

§ 113.55. Radon Emissions from Phosphogypsum Stacks (40 CFR 61, Subpart R)

SUBCHAPTER C. NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES (FCAA, §112, 40 CFR PART 63)

§ 113.100. General Provision (40 Code of Federal Regulations Part 63, Subpart A)

§ 113.105. Requirements for Control Technology Determinations for Major Sources in Accordance with Clean Air Act, §112(j) (40 Code of Federal Regulations Part 63, Subpart B, §§63.50 - 63.56)

§ 113.106. List of Hazardous Air Pollutants, Petitions Process, Lesser Quantity Designations, Source Category List (40 Code of Federal Regulations Part 63, Subpart C)

§ 113.110. Synthetic Organic Chemical Manufacturing Industry (40 Code of Federal Regulations Part 63, Subpart F)

§ 113.120. Synthetic Organic Chemical Manufacturing Industry for Process Vents, Storage Vessels, Transfer Operations, and Wastewater (40 Code of Federal Regulations Part 63, Subpart G)

§ 113.130. Organic Hazardous Air Pollutants for Equipment Leaks (40 Code of Federal Regulations Part 63, Subpart H)

§ 113.140. Certain Processes Subject to the Negotiated Regulation for Equipment Leaks (40 Code of Federal Regulations Part 63, Subpart I)

§ 113.170. Coke Oven Batteries (40 Code of Federal Regulations Part 63, Subpart L)

§ 113.180. Perchloroethylene Dry Cleaning Facilities (40 Code of Federal Regulations Part 63, Subpart M)

§ 113.190. Chromium Emissions from Hard and Decorative Chromium Electroplating and Chromium Anodizing Tanks (40 Code of Federal Regulations Part 63, Subpart N)

§ 113.200. Ethylene Oxide Emissions Standards for Sterilization Facilities (40 Code of Federal Regulations Part 63, Subpart O)

§ 113.220. Industrial Process Cooling Towers (40 Code of Federal Regulations Part 63, Subpart Q)

§ 113.230. Gasoline Distribution Facilities (Bulk Gasoline Terminals and Pipeline Breakout Stations) (40 Code of Federal Regulations Part 63, Subpart R)

§ 113.240. Pulp and Paper Industry (40 Code of Federal Regulations Part 63, Subpart S)

§ 113.250. Halogenated Solvent Cleaning (40 Code of Federal Regulations Part 63, Subpart T)

§ 113.260. Group I Polymers and Resins (40 Code of Federal Regulations Part 63, Subpart U)

§ 113.280. Epoxy Resins Production and Non-Nylon Polyamides Production (40 Code of Federal Regulations Part 63, Subpart W)

§ 113.290. Secondary Lead Smelting (40 Code of Federal Regulations Part 63, Subpart X)

§ 113.300. Marine Tank Vessel Loading Operations (40 Code of Federal Regulations Part 63, Subpart Y)

§ 113.320. Phosphoric Acid Manufacturing Plants (40 Code of Federal Regulations Part 63, Subpart AA)

§ 113.330. Phosphate Fertilizers Production Plants (40 Code of Federal Regulations Part 63, Subpart BB)

§ 113.340. Petroleum Refineries (40 Code of Federal Regulations Part 63, Subpart CC)

§ 113.350. Off-Site Waste and Recovery Operations (40 Code of Federal Regulations Part 63, Subpart DD)

§ 113.360. Magnetic Tape Manufacturing Operations (40 Code of Federal Regulations Part 63, Subpart EE)

§ 113.380. Aerospace Manufacturing and Rework Facilities (40 Code of Federal Regulations Part 63, Subpart GG)

§ 113.390. Oil and Natural Gas Production Facilities (40 Code of Federal Regulations Part 63, Subpart HH)

§ 113.400. Shipbuilding and Ship Repair (Surface Coating) (40 Code of Federal Regulations Part 63, Subpart II)

§ 113.410. Wood Furniture Manufacturing Operations (40 Code of Federal Regulations Part 63, Subpart JJ)

§ 113.420. Printing and Publishing Industry (40 Code of Federal Regulations Part 63, Subpart KK)

§ 113.430. Primary Aluminum Reduction Plants (40 Code of Federal Regulations Part 63, Subpart LL)

§ 113.440. Chemical Recovery Combustion Sources at Kraft, Soda, Sulfite, and Stand-Alone Semichemical Pulp Mills (40 Code of Federal Regulations Part 63, Subpart MM)

§ 113.450. Wool Fiberglass Manufacturing at Area Sources (40 Code of Federal Regulations Part 63, Subpart NN)

§ 113.460. Tanks--Level 1 (40 Code of Federal Regulations Part 63, Subpart OO)

§ 113.470. Containers (40 Code of Federal Regulations Part 63, Subpart PP)

§ 113.480. Surface Impoundments (40 Code of Federal Regulations Part 63, Subpart QQ)

§ 113.490. Individual Drain Systems (40 Code of Federal Regulations Part 63, Subpart RR)

§ 113.500. Closed Vent Systems, Control Devices, Recovery Devices, and Routing to a Fuel Gas System or a Process (40 Code of Federal Regulations Part 63, Subpart SS)

§ 113.510. Equipment Leaks - Control Level 1 (40 Code of Federal Regulations Part 63, Subpart TT)

§ 113.520. Equipment Leaks - Control Level 2 (40 Code of Federal Regulations Part 63, Subpart UU)

§ 113.530. Oil-Water Separators and Organic-Water Separators (40 Code of Federal Regulations Part 63, Subpart VV)

§ 113.540. Storage Vessels (Tanks) - Control Level 2 (40 Code of Federal Regulations Part 63, Subpart WW)

§ 113.550. Ethylene Manufacturing Process Units: Heat Exchange Systems and Waste Operations (40 Code of Federal Regulations Part 63, Subpart XX)

§ 113.560. Source Categories: Generic Maximum Achievable Control Technology Standards (40 Code of Federal Regulations Part 63, Subpart YY)

§ 113.600. Steel Pickling - HC1 Process Facilities and Hydrochloric Acid Regeneration Plants (40 Code of Federal Regulations Part 63, Subpart CCC)

§ 113.610. Mineral Wool Production (40 Code of Federal Regulations Part 63, Subpart DDD)

§ 113.620. Hazardous Waste Combustors (40 Code of Federal Regulations Part 63, Subpart EEE)

§ 113.640. Pharmaceuticals Production (40 Code of Federal Regulations Part 63, Subpart GGG)

§ 113.650. Natural Gas Transmission and Storage Facilities (40 Code of Federal Regulations Part 63, Subpart HHH)

§ 113.660. Flexible Polyurethane Foam Production (40 Code of Federal Regulations Part 63, Subpart III)

§ 113.670. Group IV Polymers and Resins (40 Code of Federal Regulations Part 63, Subpart JJJ)

§ 113.690. Portland Cement Manufacturing Industry (40 Code of Federal Regulations Part 63, Subpart LLL)

§ 113.700. Pesticide Active Ingredient Production (40 Code of Federal Regulations Part 63, Subpart MMM)

§ 113.710. Wool Fiberglass Manufacturing (40 Code of Federal Regulations Part 63, Subpart NNN)

§ 113.720. Manufacture of Amino/Phenolic Resins (40 Code of Federal Regulations Part 63, Subpart OOO)

§ 113.730. Polyether Polyols Production (40 Code of Federal Regulations Part 63, Subpart PPP)

§ 113.740. Primary Copper Smelting (40 Code of Federal Regulations Part 63, Subpart QQQ)

§ 113.750. Secondary Aluminum Production (40 Code of Federal Regulations Part 63, Subpart RRR)

§ 113.770. Primary Lead Smelting (40 Code of Federal Regulations Part 63, Subpart TTT)

§ 113.780. Petroleum Refineries: Catalytic Cracking Units, Catalytic Reforming Units, and Sulfur Recovery Units (40 Code of Federal Regulations Part 63, Subpart UUU)

§ 113.790. Publicly Owned Treatment Works (40 Code of Federal Regulations Part 63, Subpart VVV)

§ 113.810. Ferroalloys Production: Ferromanganese and Silicomanganese (40 Code of Federal Regulations Part 63, Subpart XXX)

§ 113.840. Municipal Solid Waste Landfills (40 Code of Federal Regulations Part 63, Subpart AAAA)

§ 113.860. Manufacturing of Nutritional Yeast (40 Code of Federal Regulations Part 63, Subpart CCCC)

§ 113.870. Plywood and Composite Wood Products (40 Code of Federal Regulations Part 63, Subpart DDDD)

§ 113.880. Organic Liquids Distribution (Non-Gasoline) (40 Code of Federal Regulations Part 63, Subpart EEEE)

§ 113.890. Miscellaneous Organic Chemical Manufacturing (40 Code of Federal Regulations Part 63, Subpart FFFF)

§ 113.900. Solvent Extraction for Vegetable Oil Production (40 Code of Federal Regulations Part 63, Subpart GGGG)

§ 113.910. Wet-Formed Fiberglass Mat Production (40 Code of Federal Regulations Part 63, Subpart HHHH)

§ 113.920. Surface Coating of Automobiles and Light-Duty Trucks (40 Code of Federal Regulations Part 63, Subpart IIII)

§ 113.930. Paper and Other Web Coating (40 Code of Federal Regulations Part 63, Subpart JJJJ)

§ 113.940. Surface Coating of Metal Cans (40 Code of Federal Regulations Part 63, Subpart KKKK)

§ 113.960. Surface Coating of Miscellaneous Metal Parts and Products (40 Code of Federal Regulations Part 63, Subpart MMMM)

§ 113.970. Surface Coating of Large Appliances (40 Code of Federal Regulations Part 63, Subpart NNNN)

§ 113.980. Printing, Coating, and Dyeing of Fabrics and Other Textiles (40 Code of Federal Regulations Part 63, Subpart OOOO)

§ 113.990. Surface Coating of Plastic Parts and Products (40 Code of Federal Regulations Part 63, Subpart PPPP)

§ 113.1000. Surface Coating of Wood Building Products (40 Code of Federal Regulations Part 63, Subpart QQQQ)

§ 113.1010. Surface Coating of Metal Furniture (40 Code of Federal Regulations Part 63, Subpart RRRR)

§ 113.1020. Surface Coating of Metal Coil (40 Code of Federal Regulations Part 63, Subpart SSSS)

§ 113.1030. Leather Finishing Operations (40 Code of Federal Regulations Part 63, Subpart TTTT)

§ 113.1040. Cellulose Products Manufacturing (40 Code of Federal Regulations Part 63, Subpart UUUU)

§ 113.1050. Boat Manufacturing (40 Code of Federal Regulations Part 63, Subpart VVVV)

§ 113.1060. Reinforced Plastic Composites Production (40 Code of Federal Regulations Part 63, Subpart WWWW)

§ 113.1070. Rubber Tire Manufacturing (40 Code of Federal Regulations Part 63, Subpart XXXX)

§ 113.1080. Stationary Combustion Turbines (40 Code of Federal Regulations Part 63, Subpart YYYY)

§ 113.1090. Stationary Reciprocating Internal Combustion Engines (40 Code of Federal Regulations Part 63, Subpart ZZZZ)

§ 113.1100. Lime Manufacturing Plants (40 Code of Federal Regulations Part 63, Subpart AAAAA)

§ 113.1110. Semiconductor Manufacturing (40 Code of Federal Regulations Part 63, Subpart BBBBB)

§ 113.1120. Coke Ovens: Pushing, Quenching, and Battery Stacks (40 Code of Federal Regulations Part 63, Subpart CCCCC)

§ 113.1130. Industrial, Commercial, and Institutional Boilers and Process Heaters Major Sources (40 Code of Federal Regulations Part 63, Subpart DDDDD)

§ 113.1140. Iron and Steel Foundries (40 Code of Federal Regulations Part 63, Subpart EEEEE)

§ 113.1150. Integrated Iron and Steel Manufacturing Facilities (40 Code of Federal Regulations Part 63, Subpart FFFFF)

§ 113.1160. Site Remediation (40 Code of Federal Regulations Part 63, Subpart GGGGG)

§ 113.1170. Miscellaneous Coating Manufacturing (40 Code of Federal Regulations Part 63, Subpart HHHHH)

§ 113.1180. Mercury Cell Chlor-Alkali Plants (40 Code of Federal Regulations Part 63, Subpart IIIII)

§ 113.1190. Brick and Structural Clay Products Manufacturing (40 Code of Federal Regulations Part 63, Subpart JJJJJ)

§ 113.1200. Clay Ceramics Manufacturing (40 Code of Federal Regulations Part 63, Subpart KKKKK)

§ 113.1210. Asphalt Processing and Asphalt Roofing Manufacturing (40 Code of Federal Regulations Part 63, Subpart LLLLL)

§ 113.1220. Flexible Polyurethane Foam Fabrication Operations (40 Code of Federal Regulations Part 63, Subpart MMMMM)

§ 113.1230. Hydrochloric Acid Production (40 Code of Federal Regulations Part 63, Subpart NNNNN)

§ 113.1250. Engine Test Cells/Stands (40 Code of Federal Regulations Part 63, Subpart PPPPP)

§ 113.1260. Friction Materials Manufacturing Facilities (40 Code of Federal Regulations Part 63, Subpart QQQQQ)

§ 113.1270. Taconite Iron Ore Processing (40 Code of Federal Regulations Part 63, Subpart RRRRR)

§ 113.1280. Refractory Products Manufacturing (40 Code of Federal Regulations Part 63, Subpart SSSSS)

§ 113.1290. Primary Magnesium Refining (40 Code of Federal Regulations Part 63, Subpart TTTTT)

§ 113.1300. Coal- and Oil-Fired Electric Utility Steam Generating Units (40 Code of Federal Regulations Part 63, Subpart UUUUU)

§ 113.1320. Hospital Ethylene Oxide Sterilizers Area Sources (40 Code of Federal Regulations Part 63, Subpart WWWWW)

§ 113.1340. Electric Arc Furnace Steelmaking Facilities Area Sources (40 Code of Federal Regulations Part 63, Subpart YYYYY)

§ 113.1350. Iron and Steel Foundries Area Sources (40 Code of Federal Regulations Part 63, Subpart ZZZZZ)

§ 113.1370. Gasoline Distribution Bulk Terminals, Bulk Plants, and Pipeline Facilities Area Sources (40 Code of Federal Regulations Part 63, Subpart BBBBBB)

§ 113.1380. Gasoline Dispensing Facilities Area Sources (40 Code of Federal Regulations Part 63, Subpart CCCCCC)

§ 113.1390. Polyvinyl Chloride and Copolymers Production Area Sources (40 Code of Federal Regulations Part 63, Subpart DDDDDD)

§ 113.1400. Primary Copper Smelting Area Sources (40 Code of Federal Regulations Part 63, Subpart EEEEEE)

§ 113.1410. Secondary Copper Smelting Area Sources (40 Code of Federal Regulations Part 63, Subpart FFFFFF)

§ 113.1420. Primary Nonferrous Metals Area Sources - Zinc, Cadmium, and Beryllium (40 Code of Federal Regulations Part 63, Subpart GGGGGG)

§ 113.1425. Paint Stripping and Miscellaneous Surface Coating Operations at Area Sources (40 Code of Federal Regulations Part 63, Subpart HHHHHH)

§ 113.1435. Industrial, Commercial, and Institutional Boilers Area Sources (40 Code of Federal Regulations Part 63, Subpart JJJJJJ)

§ 113.1445. Acrylic and Modacrylic Fibers Production Area Sources (40 Code of Federal Regulations Part 63, Subpart LLLLLL)

§ 113.1450. Carbon Black Production Area Sources (40 Code of Federal Regulations Part 63, Subpart MMMMMM)

§ 113.1455. Chemical Manufacturing Area Sources: Chromium Compounds (40 Code of Federal Regulations Part 63, Subpart NNNNNN)

§ 113.1460. Flexible Polyurethane Foam Production and Fabrication Area Sources (40 Code of Federal Regulations Part 63, Subpart OOOOOO)

§ 113.1465. Lead Acid Battery Manufacturing Area Sources (40 Code of Federal Regulations Part 63, Subpart PPPPPP)

§ 113.1470. Wood Preserving Area Sources (40 Code of Federal Regulations Part 63, Subpart QQQQQQ)

§ 113.1475. Clay Ceramics Manufacturing Area Sources (40 Code of Federal Regulations Part 63, Subpart RRRRRR)

§ 113.1480. Glass Manufacturing Area Sources (40 Code of Federal Regulations Part 63, Subpart SSSSSS)

§ 113.1485. Secondary Nonferrous Metals Processing Area Sources (40 Code of Federal Regulations Part 63, Subpart TTTTTT)

§ 113.1495. Chemical Manufacturing Area Sources (40 Code of Federal Regulations Part 63, Subpart VVVVVV)

§ 113.1500. Plating and Polishing Operations Area Sources (40 Code of Federal Regulations Part 63, Subpart WWWWWW)

§ 113.1505. Nine Metal Fabrication and Finishing Area Sources (40 Code of Federal Regulations Part 63, Subpart XXXXXX)

§ 113.1510. Ferroalloys Production Facilities Area Sources (40 Code of Federal Regulations Part 63, Subpart YYYYYY)

§ 113.1515. Aluminum, Copper, and Other Nonferrous Foundries Area Sources (40 Code of Federal Regulations Part 63, Subpart ZZZZZZ)

§ 113.1520. Asphalt Processing and Asphalt Roofing Manufacturing Area Sources (40 Code of Federal Regulations Part 63, Subpart AAAAAAA)

§ 113.1525. Chemical Preparations Industry Area Sources (40 Code of Federal Regulations Part 63, Subpart BBBBBBB)

§ 113.1530. Paints and Allied Products Manufacturing Area Sources (40 Code of Federal Regulations Part 63, Subpart CCCCCCC)

§ 113.1535. Prepared Feeds Manufacturing Area Sources (40 Code of Federal Regulations Part 63, Subpart DDDDDDD)

§ 113.1555. Polyvinyl Chloride and Copolymers Production (40 Code of Federal Regulations Part 63, Subpart HHHHHHH)

SUBCHAPTER D. DESIGNATED FACILITIES AND POLLUTANTS

DIVISION 1. MUNICIPAL SOLID WASTE LANDFILLS

§ 113.2060. Definitions

§ 113.2061. Standards for Air Emissions

§ 113.2067. Exemptions

§ 113.2069. Compliance Schedule and Transition to 2016 Landfill Emission Guidelines

DIVISION 2. HOSPITAL/MEDICAL/INFECTIOUS WASTE INCINERATORS

§ 113.2070. Definitions

§ 113.2071. Designated Facilities

§ 113.2072. Emission Limits

§ 113.2074. Inspection Requirements

§ 113.2075. Compliance and Performance Testing Requirements

§ 113.2076. Monitoring, Reporting, and Recordkeeping Requirements

§ 113.2077. Waste Management Plan

§ 113.2078. Operating Procedures and Operator Training/Qualification Requirements

§ 113.2079. Compliance Schedules

DIVISION 3. EMISSION GUIDELINES AND COMPLIANCE TIMES FOR SMALL MUNICIPAL WASTE COMBUSTION UNITS CONSTRUCTED ON OR BEFORE AUGUST 30, 1999

§ 113.2100. Definitions

§ 113.2101. What are my requirements for meeting increments of progress and achieving final compliance?

§ 113.2102. When must I complete each increment of progress?

§ 113.2103. What must I include in the notifications of achievement of my increments of progress?

§ 113.2104. When must I submit the notifications of achievement of increments of progress?

§ 113.2105. What if I do not meet an increment of progress?

§ 113.2106. How do I comply with the increment of progress for submittal of a control plan?

§ 113.2107. How do I comply with the increment of progress for awarding contracts?

§ 113.2108. How do I comply with the increment of progress for initiating onsite construction?

§ 113.2109. How do I comply with the increment of progress for completing onsite construction?

§ 113.2110. How do I comply with the increment of progress for achieving final compliance?

§ 113.2111. What must I do if I close my municipal waste combustion unit and then restart my municipal waste combustion unit?

§ 113.2112. What must I do if I plan to permanently close my municipal waste combustion unit and not restart it?

§ 113.2113. What types of training must I do?

§ 113.2114. Who must complete the operator training course? By when?

§ 113.2115. Who must complete the plant-specific training course?

§ 113.2116. What plant-specific training must I provide?

§ 113.2117. What information must I include in the plant-specific operating manual?

§ 113.2118. Where must I keep the plant-specific operating manual?

§ 113.2119. What types of operator certification must the chief facility operator and shift supervisor obtain and by when must they obtain it?

§ 113.2120. After the required date for operator certification, who may operate the municipal waste combustion unit?

§ 113.2121. What if all the certified operators must be temporarily offsite?

§ 113.2122. What are the operating practice requirements for my municipal waste combustion unit?

§ 113.2123. What happens to the operating requirements during periods of startup, shutdown, and malfunction?

§ 113.2124. What pollutants are regulated by this division?

§ 113.2125. What emission limits must I meet? By when?

§ 113.2126. What happens to the emission limits during periods of startup, shutdown, and malfunction?

§ 113.2127. What types of continuous emission monitoring must I perform?

§ 113.2128. What continuous emission monitoring systems must I install for gaseous pollutants?

§ 113.2129. How are the data from the continuous emission monitoring systems used?

§ 113.2130. How do I make sure my continuous emission monitoring systems are operating correctly?

§ 113.2131. Am I exempt from any 40 Code of Federal Regulations Part 60, Appendix B or Appendix F requirements to evaluate continuous emission monitoring systems?

§ 113.2132. What is my schedule for evaluating continuous emission monitoring systems?

§ 113.2133. What must I do if I choose to monitor carbon dioxide instead of oxygen as a diluent gas?

§ 113.2134. What is the minimum amount of monitoring data I must collect with my continuous emission monitoring systems and is the data collection requirement enforceable?

§ 113.2135. How do I convert my 1-hour arithmetic averages into appropriate averaging times and units?

§ 113.2136. What is required for my continuous opacity monitoring system and how are the data used?

§ 113.2137. What additional requirements must I meet for the operation of my continuous emission monitoring systems and continuous opacity monitoring system?

§ 113.2138. What must I do if any of my continuous emission monitoring systems are temporarily unavailable to meet the data collection requirements?

§ 113.2139. What types of stack tests must I conduct?

§ 113.2140. How are the stack test data used?

§ 113.2141. What schedule must I follow for the stack testing?

§ 113.2142. What test methods must I use to stack test?

§ 113.2143. May I conduct stack testing less often?

§ 113.2144. May I deviate from the 13-month testing schedule if unforeseen circumstances arise?

§ 113.2145. Must I meet other requirements for continuous monitoring?

§ 113.2146. How do I monitor the load of my municipal waste combustion unit?

§ 113.2147. How do I monitor the temperature of flue gases at the inlet of my particulate matter control device?

§ 113.2148. How do I monitor the injection rate of activated carbon?

§ 113.2149. What is the minimum amount of monitoring data I must collect with my continuous parameter monitoring systems and is the data collection requirement enforceable?

§ 113.2150. What records must I keep?

§ 113.2151. Where must I keep my records and for how long?

§ 113.2152. What records must I keep for operator training and certification?

§ 113.2153. What records must I keep for stack tests?

§ 113.2154. What records must I keep for continuously monitored pollutants or parameters?

§ 113.2155. What records must I keep for municipal waste combustion units that use activated carbon?

§ 113.2156. What reports must I submit and in what form?

§ 113.2157. What are the appropriate units of measurement for reporting my data?

§ 113.2158. When must I submit the initial report?

§ 113.2159. What must I include in my initial report?

§ 113.2160. When must I submit the annual report?

§ 113.2161. What must I include in my annual report?

§ 113.2162. What must I do if I am out of compliance with the requirements of this division?

§ 113.2163. If a semiannual report is required, when must I submit it?

§ 113.2164. What must I include in the semiannual out-of-compliance reports?

§ 113.2165. Can reporting dates be changed?

§ 113.2166. What is an air curtain incinerator?

§ 113.2167. What is yard waste?

§ 113.2168. What are the emission limits for air curtain incinerators that burn 100 percent yard waste?

§ 113.2169. How must I monitor opacity for air curtain incinerators that burn 100 percent yard waste?

§ 113.2170. What are the recordkeeping and reporting requirements for air curtain incinerators that burn 100 percent yard waste?

§ 113.2171. What equations must I use?

§ 113.2172. Does this subpart require me to obtain an operating permit under Title V of the Federal Clean Air Act?

§ 113.2173. When must I submit a Title V permit application for my existing small municipal waste combustion unit?

§ 113.2174. Tables Relating to Division 3

DIVISION 4. EMISSIONS GUIDELINES AND COMPLIANCE TIMES FOR COMMERCIAL AND INDUSTRIAL SOLID WASTE INCINERATION UNITS THAT COMMENCED CONSTRUCTION ON OR BEFORE NOVEMBER 30, 1999

§ 113.2200. Definitions

§ 113.2201. What are my requirements for meeting increments of progress and achieving final compliance?

§ 113.2202. When must I complete each increment of progress?

§ 113.2203. What must I include in the notifications of achievement of increments of progress?

§ 113.2204. When must I submit the notifications of achievement of increments of progress?

§ 113.2205. What if I do not meet an increment of progress?

§ 113.2206. How do I comply with the increment of progress for submittal of a control plan?

§ 113.2207. How do I comply with the increment of progress for achieving final compliance?

§ 113.2208. What must I do if I close my commercial and industrial solid waste incineration unit and then restart it?

§ 113.2209. What must I do if I plan to permanently close my commercial and industrial solid waste incineration unit and not restart it?

§ 113.2210. What is a waste management plan?

§ 113.2211. When must I submit my waste management plan?

§ 113.2212. What should I include in my waste management plan?

§ 113.2213. What are the operator training and qualification requirements?

§ 113.2214. When must the operator training course be completed?

§ 113.2215. How do I obtain my operator qualification?

§ 113.2216. How do I maintain my operator qualification?

§ 113.2217. How do I renew my lapsed operator qualification?

§ 113.2218. What site-specific documentation is required?

§ 113.2219. What if all the qualified operators are temporarily not accessible?

§ 113.2220. What emission limitations must I meet and by when?

§ 113.2221. What operating limits must I meet and by when?

§ 113.2222. What if I do not use a wet scrubber to comply with the emission limitations?

§ 113.2223. What happens during periods of startup, shutdown, and malfunction?

§ 113.2224. How do I conduct the initial and annual performance test?

§ 113.2225. How are the performance test data used?

§ 113.2226. How do I demonstrate initial compliance with the emission limitations and establish the operating limits?

§ 113.2227. By what date must I conduct the initial performance test?

§ 113.2228. How do I demonstrate continuous compliance with the emission limitations and the operating limits?

§ 113.2229. By what date must I conduct the annual performance test?

§ 113.2230. May I conduct performance testing less often?

§ 113.2231. May I conduct a repeat performance test to establish new operating limits?

§ 113.2232. What monitoring equipment must I install and what parameters must I monitor?

§ 113.2233. Is there a minimum amount of monitoring data I must obtain?

§ 113.2234. What records must I keep?

§ 113.2235. Where and in what format must I keep my records?

§ 113.2236. What reports must I submit?

§ 113.2237. When must I submit my waste management plan?

§ 113.2238. What information must I submit following my initial performance test?

§ 113.2239. When must I submit my annual report?

§ 113.2240. What information must I include in my annual report?

§ 113.2241. What else must I report if I have a deviation from the operating limits or the emission limitations?

§ 113.2242. What must I include in the deviation report?

§ 113.2243. What else must I report if I have a deviation from the requirement to have a qualified operator accessible?

§ 113.2244. Are there any other notifications or reports that I must submit?

§ 113.2245. In what form can I submit my reports?

§ 113.2246. Can reporting dates be changed?

§ 113.2247. Am I required to apply for and obtain a Title V operating permit for my unit?

§ 113.2248. What is an air curtain incinerator?

§ 113.2249. What are my requirements for meeting increments of progress and achieving final compliance?

§ 113.2250. When must I complete each increment of progress?

§ 113.2251. What must I include in the notifications of achievement of increments of progress?

§ 113.2252. When must I submit the notifications of achievement of increments of progress?

§ 113.2253. What if I do not meet an increment of progress?

§ 113.2254. How do I comply with the increment of progress for submittal of a control plan?

§ 113.2255. How do I comply with the increment of progress for achieving final compliance?

§ 113.2256. What must I do if I close my air curtain incinerator and then restart it?

§ 113.2257. What must I do if I plan to permanently close my air curtain incinerator and not restart it?

§ 113.2258. What are the emission limitations for air curtain incinerators?

§ 113.2259. How must I monitor opacity for air curtain incinerators?

§ 113.2260. What are the recordkeeping and reporting requirements for air curtain incinerators?

§ 113.2261. Tables Relating to Division 4

DIVISION 5. EMISSION GUIDELINES AND COMPLIANCE TIMES FOR OTHER SOLID WASTE INCINERATION UNITS THAT COMMENCED CONSTRUCTION ON OR BEFORE DECEMBER 9, 2004

§ 113.2300. Definitions

§ 113.2301. When must I comply?

§ 113.2302. What must I do if I close my other solid waste incineration unit and then restart it?

§ 113.2303. What must I do if I plan to permanently close my other solid waste incineration unit and not restart it?

§ 113.2304. What is a waste management plan?

§ 113.2305. When must I submit my waste management plan?

§ 113.2306. What should I include in my waste management plan?

§ 113.2307. What are the operator training and qualification requirements?

§ 113.2308. When must the operator training course be completed?

§ 113.2309. How do I obtain my operator qualification?

§ 113.2310. How do I maintain my operator qualification?

§ 113.2311. How do I renew my lapsed operator qualification?

§ 113.2312. What site-specific documentation is required?

§ 113.2313. What if all the qualified operators are temporarily not accessible?

§ 113.2314. What emission limitations must I meet and by when?

§ 113.2315. What operating limits must I meet and by when?

§ 113.2316. What if I do not use a wet scrubber to comply with the emission limitations?

§ 113.2317. What happens during periods of startup, shutdown, and malfunction?

§ 113.2318. How do I conduct the initial and annual performance test?

§ 113.2319. How are the performance test data used?

§ 113.2320. How do I demonstrate initial compliance with the emission limitations and establish the operating limits?

§ 113.2321. By what date must I conduct the initial performance test?

§ 113.2322. How do I demonstrate continuous compliance with the emission limitations and the operating limits?

§ 113.2323. By what date must I conduct the annual performance test?

§ 113.2324. May I conduct performance testing less often?

§ 113.2325. May I conduct a repeat performance test to establish new operating limits?

§ 113.2326. What continuous emission monitoring systems must I install?

§ 113.2327. How do I make sure my continuous emission monitoring systems are operating correctly?

§ 113.2328. What is my schedule for evaluating continuous emission monitoring systems?

§ 113.2329. What is the minimum amount of monitoring data I must collect with my continuous emission monitoring systems, and is the data collection requirement enforceable?

§ 113.2330. How do I convert my 1-hour arithmetic averages into the appropriate averaging times and units?

§ 113.2331. What operating parameter monitoring equipment must I install, and what operating parameters must I monitor?

§ 113.2332. Is there a minimum amount of operating parameter monitoring data I must obtain?

§ 113.2333. What records must I keep?

§ 113.2334. Where and in what format must I keep my records?

§ 113.2335. What reports must I submit?

§ 113.2336. What information must I submit following my initial performance test?

§ 113.2337. When must I submit my annual report?

§ 113.2338. What information must I include in my annual report?

§ 113.2339. What else must I report if I have a deviation from the operating limits or the emission limitations?

§ 113.2340. What must I include in the deviation report?

§ 113.2341. What else must I report if I have a deviation from the requirement to have a qualified operator accessible?

§ 113.2342. Are there any other notifications or reports that I must submit?

§ 113.2343. In what form can I submit my reports?

§ 113.2344. Can reporting dates be changed?

§ 113.2345. Am I required to apply for and obtain a Title V operating permit for my unit?

§ 113.2346. When must I submit a Title V permit application for my existing unit?

§ 113.2347. What are the requirements for temporary-use incinerators and air curtain incinerators used in disaster recovery?

§ 113.2348. What is an air curtain incinerator?

§ 113.2349. When must I comply if my air curtain incinerator burns only wood waste, clean lumber, and yard waste?

§ 113.2350. What must I do if I close my air curtain incinerator that burns only wood waste, clean lumber, and yard waste and then restart it?

§ 113.2351. What must I do if I plan to permanently close my air curtain incinerator that burns only wood waste, clean lumber, and yard waste and not restart it?

§ 113.2352. What are the emission limitations for air curtain incinerators that burn only wood waste, clean lumber, and yard waste?

§ 113.2353. How must I monitor opacity for air curtain incinerators that burn only wood waste, clean lumber, and yard waste?

§ 113.2354. What are the recordkeeping and reporting requirements for air curtain incinerators that burn only wood waste, clean lumber, and yard waste?

§ 113.2355. Am I required to apply for and obtain a Title V operating permit for my air curtain incinerator that burns only wood waste, clean lumber, and yard waste?

§ 113.2356. What equations must I use?

§ 113.2357. Tables Relating to Division 5

DIVISION 6. 2016 EMISSION GUIDELINES FOR EXISTING MUNICIPAL SOLID WASTE LANDFILLS

§ 113.2400. Applicability

§ 113.2402. Definitions

§ 113.2404. Standards for Existing Municipal Solid Waste Landfills

§ 113.2406. Exemptions, Alternate Emission Standards, and Alternate Compliance Schedules

§ 113.2408. Federal Operating Permit Requirements

§ 113.2410. Initial and Annual Reporting, and Modified Reporting Requirements for Legacy Controlled Landfills

§ 113.2412. Implementation Date and Increments of Progress

SUBCHAPTER E. CONSOLIDATED FEDERAL AIR RULES (CAR): SYNTHETIC ORGANIC CHEMICAL MANUFACTURING INDUSTRY (SOCMI) {FCAA, §112, 40 CFR PART 65}

§ 113.3000. General Provisions (40 CFR Part 65, Subpart A)

§ 113.3020. Storage Vessels (40 CFR Part 65, Subpart C)

§ 113.3030. Process Vents (40 CFR Part 65, Subpart D)

§ 113.3040. Transfer Racks (40 CFR Part 65, Subpart E)

§ 113.3050. Equipment Leaks (40 CFR Part 65, Subpart F)

§ 113.3060. Closed Vent Systems, Control Devices, and Routing to a Fuel Gas System or a Process (40 CFR Part 65, Subpart G)