 |
Texas Administrative Code (Last Updated: March 27,2024) |
 |
TITLE 30. ENVIRONMENTAL QUALITY |
|
PART 1. TEXAS COMMISSION ON ENVIRONMENTAL QUALITY |
|
CHAPTER 113. STANDARDS OF PERFORMANCE FOR HAZARDOUS AIR POLLUTANTS AND FOR DESIGNATED FACILITIES AND POLLUTANTS |
|
SUBCHAPTER D. DESIGNATED FACILITIES AND POLLUTANTS |
|
DIVISION 4. EMISSIONS GUIDELINES AND COMPLIANCE TIMES FOR COMMERCIAL AND INDUSTRIAL SOLID WASTE INCINERATION UNITS THAT COMMENCED CONSTRUCTION ON OR BEFORE NOVEMBER 30, 1999 |
SECTION 113.2226. How do I demonstrate initial compliance with the emission limitations and establish the operating limits?
Latest version.
-
You must conduct an initial performance test, as required under 40 Code of Federal Regulations §60.8, to determine compliance with the emission limitations in Table 2 in §113.2261 of this title (relating to Tables Relating to Division 4) and to establish operating limits using the procedure in §113.2221 or §113.2222 of this title (relating to What operating limits must I meet and by when? or What if I do not use a wet scrubber to comply with the emission limitations?). The initial performance test must be conducted using the test methods listed in Table 2 in §113.2261 of this title and the procedures in §113.2224 of this title (relating to How do I conduct the initial and annual performance test?).
Source Note: The provisions of this §113.2226 adopted to be effective May 14, 2009, 34 TexReg 2771