SECTION 4.215. Minimum Operating Information

A permit application for on-lease commercial solid oil and gas waste recycling shall include the following operating information:

(1) a list of Commission districts for which the applicant seeks authority for on-lease commercial solid oil and gas waste recycling;

(2) the estimated maximum volume of untreated oil and gas waste and partially treated oil and gas waste to be stored;

(3) the estimated maximum volume and time that the recyclable product will be stored;

(4) a general description of the recycling process to be employed; a flow diagram showing the process and identifying all equipment and chemicals or additives (e.g., asphalt emulsion, quicklime, Portland cement, fly ash, etc.) to be used in the process; and the Material Safety Data Sheets for any chemical or additive;

(5) a description of all inert material (e.g., brick, rock, gravel, caliche) to be stored and used as aggregate in the treatment process; and

(6) a description of any testing to be performed to demonstrate that the proposed processing will result in a recyclable product that meets the engineering and environmental standards for the proposed use.

Source Note: The provisions of this §4.215 adopted to be effective April 15, 2013, 38 TexReg 2334