SECTION 55.205. Identification and Marking Requirements

All floating cabins required to be permitted under the provisions of Parks and Wildlife Code, Chapter 32, shall be marked as follows.

(1) The permit number must be displayed on the outside of the cabin area on two opposite sides. The number shall be attached to or painted in block arabic letters of good proportion in contrasting color to the background and be at least three inches in height. The assigned permit numbering pattern consists of the prefix "FC" followed by a combination of numerals and an annual validation sticker. The group of numerals appearing between the letters and validation sticker shall be separated by a hyphen or equivalent space.

(2) Each floating cabin must exhibit an orange reflector measuring a minimum of 3 inches. Reflectors shall be mounted on the outer 1/3 portion of each side of the floating cabin in a manner allowing an unobstructed view from an approach to the side.

Source Note: The provisions of this §55.205 adopted to be effective February 11, 2002, 27 TexReg 946